How To Label Cash Register Sharp Er-a420

• Contents
• Tabular array of Contents
• Bookmarks

  Also See for Sharp ER-A420

  Related Manuals for Sharp ER-A420

  Summary of Contents for Sharp ER-A420

• Page ane ELECTRONIC Greenbacks REGISTER MODEL ER-A410 ER-A420 Didactics MANUAL The above analogy shows the model ER-A410. HYO-1,four(SEEG)(E) 02.iv.20, 6:46 PM...
• Page 2 ER-A410/A420(Hyo2,3) 02.4.20 half-dozen:46 PM Page C2 Caution: The greenbacks register and the remote drawer should be securely fitted to the supporting platforms to avoid instability when the drawers are open. CAUTION: The socket-outlet shall be installed near the equipment and shall be hands accessible. VORSICHT: Die Netzsteckdose muß...

• Page 3: Introduction

  ER-A410/A420-English 02.four.20 six:47 PM INTRODUCTION Give thanks you very much for your purchase of the SHARP Electronic Cash Register, Model ER-A410/A420. Please read this manual carefully before operating your car in society to gain total understanding of functions and features. Please keep this manual for future reference. It will help you, if you see any operational problems.

• Page iv: Table Of Contents

  KEYBOARD ·························································································································································10 1 ER-A410 standard keyboard layout·········································································································10 2 ER-A420 standard keyboard layout·········································································································12 3 Standard key number layout····················································································································thirteen iv Inserting of the primal sail (ER-A420) ······································································································14 KEYS AND SWITCHES ·······································································································································15 1 Mode switch and manner keys ···················································································································15 2 Drawer lock fundamental ·······································································································································fifteen DISPLAYS ···························································································································································16...
• Page five ER-A410/A420-English language 02.4.xx 6:47 PM High amount lockout (HALO), particular/subtotal selection, and +/- sign ·····················································27 vii Programming for commutation keys ( Tab of foreign currency·························································································································28 8 Programming for the Loftier amount lockout (HALO)················································································································28 9 Programming for the Loftier amount lockout (HALO) and functional selection ·········································································29 10 Programming the tax charge per unit ························································································································xxx Tax rate ················································································································································30 Job-Code-Based Programming ························································································································31...
• Page half dozen ER-A410/A420-English 02.4.20 6:47 PM 8 Programming of function text···················································································································61 Programming (#2314)···························································································································61 List of function texts······························································································································62 9 Cashier and clerk programming ··············································································································64 Cashier lawmaking (#1500) ···························································································································64 Cashier proper noun (#1514)··························································································································64 Functional programming for cashiers (#2510)······················································································65 Programming of PBLU code (#2511) ···································································································65 Clerk code (#1400) ·······························································································································66 Clerk proper noun (#1414)······························································································································66 x Programming diverse functions ···············································································································67 Programming for optional feature selection (#2616) ············································································67...
• Page 7 ER-A410/A420-English 02.4.xx vi:47 PM X1/ZI stacked study ···························································································································112 iii Periodic consolidation····························································································································113 Generality ···········································································································································113 Daily net study ··································································································································114 X2/Z2 stacked report ··························································································································114 COMPULSORY CASH/Cheque Announcement ···························································································115 PROGRAMMING FOR EURO ···························································································································117 Automatic modification of register arrangement for introduction of EURO··················································118 Optional programming for the introduction of EURO··········································································119 OVERRIDE ENTRIES ········································································································································120 CORRECTION AFTER FINALIZING A TRANSACTION (AFTER GENERATING A RECEIPT)······················121 FOR THE OPERATOR...
• Page 8 ER-A410/A420-English 02.4.twenty 6:47 PM Refund entries ····································································································································146 Printing of non-add code numbers ·····································································································146 8 Payment handling ································································································································147 Currency exchange ····························································································································147 Received on business relationship entries ··············································································································148 Paid out entries···································································································································148 No auction (exchange) ····························································································································149 Cashing a cheque·······························································································································149 ix Automatic sequencing key ( CORRECTION ···················································································································································150 1 Correction of the concluding entry (direct void)·································································································150 ii Correction of the side by side-to-last or before entries (indirect void)································································150...

• Folio 9: External View Of The Er-A410

  ER-A410/A420-English 02.4.xx 6:47 PM EXTERNAL VIEW OF THE ER-A410 Front view Printer cover Receipt paper Journal window Keyboard Drawer lock Drawer Rear view Page 7 Customer display (Pop-up type) Operator display Mode switch RS-232C connector...

• Folio ten: External View Of The Er-A420

  ER-A410/A420-English 02.4.20 6:47 PM EXTERNAL VIEW OF THE ER-A420 Front view Printer cover Receipt paper Journal window Keyboard Drawer lock Drawer Rear view Page 8 Client display (Pop-up blazon) Operator display Way switch RS-232C connector...

• Page 11: Printer

  ER-A410/A420-English 02.four.xx vi:47 PM PRINTER The printer is a receipt/journal dual station blazon thermal printer, and therefore it does not require whatsoever type of ink ribbon or cartridge. The average life of the printer is approximately v 1000000 lines. When removing the printer cover, elevator up its rear. When installing the printer embrace, hook it on the pawls on the cabinet and shut information technology.

• Page 12: Keyboard

  ER-A410/A420-English language 02.iv.20 half dozen:47 PM KEYBOARD ER-A410 standard keyboard layout RECEIPT JOURNAL DIFFER RCPT RA PO All the keys but the receipt paper feed and journal newspaper feed keys can be re-positioned. Note If yous want to change the layout, consult your dealer. Receipt newspaper feed key RECEIPT Journal paper feed key...

• Page 13: Optional Keys

  ER-A410/A420-English 02.4.twenty 6:47 PM Optional keys Slip Slip print key Percent two through iv keys Automobile Automatic sequencing 2 through 5 keys Motorcar Greenbacks total 2 primal Credit 3 and 4 keys Received-on-account ii primal Paid-out 2 fundamental The section and direct PLU keys can be extended, if you crave extension of the department Note or direct PLU keys, please contact your dealer.

• Folio 14: Er-A420 Standard Keyboard Layout

  ER-A410/A420-English 02.4.20 vi:47 PM ER-A420 standard keyboard layout RECEIPT JOURNAL RCPT Re-create CASH Machine All the keys but the receipt newspaper feed and periodical newspaper feed keys can exist re-positioned. Annotation If you want to change the layout, consult your dealer.

• Page 15: Standard Key Number Layout

  ER-A410/A420-English 02.4.20 half-dozen:47 PM Optional keys Sideslip Slip print key Per centum 2 through iv keys AUTO Automatic sequencing 2 through 5 keys AUTO Greenbacks total two key Credit 3 and 4 keys Received-on-account ii fundamental Paid-out 2 fundamental The department and straight PLU keys can be extended, if you require extension of the section Notation or direct PLU keys, please contact your dealer.

• Folio xvi: Inserting Of The Cardinal Sheet (Er-A420)

  • Replace the keyboard sheet with a new one if past take a chance information technology gets moisture. Use of a wet keyboard sheet may cause issues. • Be sure to utilise simply Precipitous-supplied keyboard sheets. Thick or difficult sheets make key operations difficult.

• Folio 17: Keys And Switches

  ER-A410/A420-English language 02.4.twenty six:47 PM KEYS AND SWITCHES Mode switch and manner keys The mode switch can be operated by inserting one of the 3 supplied mode keys – manager (MA), submanager (SM), and operator (OP) keys. These keys can be inserted or removed only when the switch is in the "REG"...

• Page 18: Displays

  ER-A410/A420-English 02.iv.20 half dozen:47 PM DISPLAYS Operator display The operator display consists of a 2-line LCD dot-matrix display (16 characters/line). Price level / PLU level (e.g. P2L3) Receipt OFF indicator ("_") / Stock alarm indicator (" • ") Repeat / Sentinel marking / Power salvage mark •...

• Page 19: For The Manager

  PRIOR TO PROGRAMMING Programming keyboard layout When you are in the PGM1 or PGM2 style, the keyboard layout will be ready to the one for programming as shown below. For ER-A410 RECEIPT JOURNAL For ER-A420 à â RECEIPT Periodical æ ù...

• Page 20: How To Plan Alphanumeric Characters

  : This fundamental toggles the double-size grapheme mode and normal-size character fashion. The default is the normal-size grapheme mode. The double-size grapheme is displayed with the letter of the alphabet "=" (ex. =Due south). [Ex.] To program the name "SHARP" in double size : Entering lowercase letters Ó...
• Page 21 FOR THE MANAGER-1-A410/A420 02.4.20 6:48 PM Alphanumeric character code table Code Character Code á â ê î ì í ô ó û ú œ ´´ ú ´´ ó ¨ ´´ Ú ´´ Ó (space) " & ' (DC) : Double-size character lawmaking : The shaded grapheme cannot be displayed (displayed every bit space).

• Page 22: Programming

  FOR THE MANAGER-1-A410/A420 02.4.20 6:48 PM PROGRAMMING This chapter illustrates how to program your greenbacks annals. Basic instructions All the programming items can be programmed past the Task-Code-Based Programming described later. Nonetheless, your auto allows yous to program some items using the Direct Programming, which does non crave you to enter the chore code.

• Page 23: Time

  • For display and print, 24-hour format is applied by default. To change it to 12-hour format, contact Note your dealer. Programming for departments Your machine is equipped with twenty (ER-A410)/6 (ER-A420) standard departments and up to 99 optional departments. Your automobile allows you lot to perform the post-obit programming for each department. Unit of measurement price PGM one...

• Page 24: Functional Choice

  FOR THE MANAGER-1-A410/A420 02.4.20 half dozen:48 PM Functional selection Procedure To plan for another dept. To set all zeros ABCDEFGHIJKL à Dept. lawmaking (i – 99) Detail: VAT4 or TAX4 VAT3 or TAX3 VAT2 or TAX2 VAT1 or TAX1 Detail validation printing Registration type Type of unit price entry Meaning digit for HALO...

• Folio 25: Toll Lookup (Plu) Programming

  FOR THE Manager-1-A410/A420 02.iv.xx 6:48 PM • Registration type (SICS/SIF/Normal type) SICS: If the kickoff registration is to a department prepare for SICS, the sale is finalized as soon as the department key is pressed. If the sale is preceded by registrations to departments non set for SICS, a sale to a department gear up for SICS does not finalize and can be repeated until the SIF: Whenever a sale is fabricated to a department prepare for SIF, the sale is finalized as soon as the department...

• Page 26: Functional Selection

  FOR THE Director-1-A410/A420 02.iv.xx half-dozen:48 PM Example Key operation Functional selection Procedure To plan for another PLU fifty Ò Direct PLU key PLU lawmaking (max. 6 digits) Detail: Sign (+/-) VAT4 or TAX4 VAT3 or TAX3 VAT2 or TAX2 VAT1 or TAX1 Type of unit price entry Committee group number •...

• Page 27: Plu Consignment To Department

  FOR THE MANAGER-one-A410/A420 02.4.20 6:48 PM • Tax status Assign a taxation status to each PLU/subdepartment. • The taxation system of your car has been factory-gear up to automated VAT1 – four. If you desire to Note select any of automatic tax1 – 4, manual VAT1 – 4, manual VAT1, transmission tax1 – four, and the combination of automated VAT1 and the automated tax2 –...

• Page 28: Programming For Discount Keys

  FOR THE Director-1-A410/A420 02.four.20 half-dozen:48 PM Programming for disbelieve keys ( Deduction amount Procedure To program zero Deduction amount (max. 6 digits) Example Fundamental functioning Programming for pct and exchange keys ( Percentage charge per unit and currency exchange rate Procedure To programme nix % •...

• Page 29: Programming For Discount And Percent Keys ( - And % )

  FOR THE Manager-1-A410/A420 02.four.xx 6:48 PM Programming for discount and pct keys ( High amount lockout (HALO), item/subtotal selection, and +/- sign Procedure To programme cypher ≈ * ABCD * Detail: Sign (+/-) Item/subtotal selection Meaning digit for HALO (for Number of zeros to follow the significant digit for HALO (for HALO (High amount lockout) Note...

• Page 30: Programming For Exchange Keys

  FOR THE MANAGER-one-A410/A420 02.four.20 six:48 PM Programming for exchange keys ( Tab of strange currency When you introduce EURO on your annals, this setting for the Note execution of Job #800 in the X2/Z2 mode. Procedure To program zero Tab: Number of digits after decimal indicate (0 – three) Case Fundamental operation Programming for the...

• Page 31: Programming For The And

  FOR THE Director-ane-A410/A420 02.4.twenty half dozen:48 PM Programming for the High amount lockout (HALO) and functional choice Procedure To program zero ≈ * ABCDEFGHIJ * Item: EFT transaction Slip printing Footer printing on receipt Non-add lawmaking entry Change enable (Over-tender enable) Validation press Drawer opening Compulsory amount tendered...

• Page 32: Programming The Tax Charge per unit

  FOR THE MANAGER-ane-A410/A420 02.4.20 6:48 PM Programming the revenue enhancement charge per unit Revenue enhancement rate PGM two Procedure ◊ *Tax charge per unit no. ≈ (1 – 4) *Tax rate no.: Enter a corresponding tax rate number. For instance, when you program a taxation rate as tax charge per unit 1, enter "1", and when you lot program it as revenue enhancement rate 4, enter "four".

• Page 33: Job-Code-Based Programming

  FOR THE Manager-i-A410/A420 02.four.20 6:48 PM Job-Lawmaking-Based Programming This section illustrates how to program items using job codes. Using job codes allows yous to program a wide variety of items in comparing with direct programming. Start this programming by entering a corresponding job lawmaking as shown beneath. ≈...

• Page 34: Setting The Annals And Consecutive Numbers

  FOR THE MANAGER-ane-A410/A420 02.iv.20 vi:48 PM Example Key operation Setting the annals and consecutive numbers Setting the register number When your store has two or more registers, it is practical to set separate annals numbers for their identification. You lot may set them in a maximum of six digits. Process To set the register number "0"...

• Page 35: Programming The Tax Rate

  FOR THE Director-1-A410/A420 02.4.xx 6:48 PM Example Programming the tax rate Taxation rate PGM ii 2711 Process ≈ 2711 *A: Enter a corresponding tax rate number. For case, when yous programme a tax rate every bit tax charge per unit one, enter ane and when you programme information technology equally revenue enhancement rate four, enter 4.

• Page 36: Programming For Departments

  FOR THE MANAGER-i-A410/A420 02.4.20 6:48 PM Programming for departments Your auto is equipped with 20 (ER-A410)/6 (ER-A420) standard departments and upward to 99 optional departments. Your automobile allows you to perform the following programming for each department. Functional programming You can set each department for: •...

• Folio 37: Revenue enhancement Status (#2111)

  FOR THE Manager-1-A410/A420 02.four.twenty half dozen:48 PM Tax status PGM ii Assign a tax condition to each department. When entries are made into taxable departments in a transaction, taxation is automatically computed according to the associated revenue enhancement charge per unit every bit soon as the transaction is completed. Process ≈...

• Page 38: A Limit Amount (Halo) Of Entry (#2112)

  FOR THE Managing director-1-A410/A420 02.four.twenty 6:48 PM A limit amount (HALO) of entry You can set amounts (HALO: High Amount Lockout) for each department. The limit is constructive for the REG way operations and tin exist overridden in the MGR way. HALO limit is represented by two figures equally follows: Procedure ≈...

• Folio 39: Unit Price (#1110)

  FOR THE Manager-1-A410/A420 02.four.xx six:48 PM Unit toll PGM i PGM 2 You lot can plan unit of measurement prices upward to a maximum of six digits (9999.99). Even if a section is not programmed to allow the entry of preset unit prices in functional programming (job #2110), the department is automatically changed to allow the entry of preset unit prices by this programming entry.

• Page xl: Group Number 2116

  FOR THE MANAGER-1-A410/A420 02.4.20 6:48 PM Group number PGM 2 You tin can assign departments to a maximum of xiv groups (1 through 14). This programming enables you to take grouping department sales reports. Procedure ≈ 2116 * Group number: Dept. (+) Dept.

• Page 41: Department Key Positioning (#2119)

  To assign the section to a key position, select the key number of the position. For central number position, refer to section "iii Standard key number layout" in chapter "KEYBOARD". Procedure ≈ 2119 The key number placement is determined past your local authorized Sharp dealer. Annotation Case Page 39 2119...

• Page 42: Cost Lookup (Plu) Programming

  FOR THE Director-1-A410/A420 02.4.20 vi:48 PM Cost lookup (PLU) programming Your auto has 2 kinds of PLU registration methods. Straight PLU registration: Accomplished by pressing item central (direct PLU cardinal) directly. Indirect PLU registration: Accomplished past making an entry of PLU code and pressing the Each PLU requires yous to programme the following: PLU code (six digits) Associated section...

• Page 43: Department Consignment (#1200, 2230)

  FOR THE MANAGER-one-A410/A420 02.4.20 half dozen:48 PM PLU level assignment and direct PLU key positioning Stock quantity For some items, you can plan in two ways: programming an individual PLU code and for a Notation range of sequential PLU codes. The procedure marked "For each PLU" shows private PLU programming.

• Page 44: Unit Prices (#1210)

  FOR THE Manager-one-A410/A420 02.4.20 six:48 PM Unit of measurement prices PGM one PGM 2 Procedure ≈ 1210 ≈ PLU code (1 - 999999) Case Central operation Base of operations quantity PGM 1 Procedure ≈ 1211 Example Primal performance Page 42 1210 Direct To program for the post-obit PLU To program zippo To program zero Unit of measurement cost ane...

• Folio 45: Plu/Subdepartment Mode (#2210, 2231)

  FOR THE Manager-1-A410/A420 02.four.20 half dozen:48 PM PLU/subdepartment fashion Process For each PLU ≈ 2210 For a range of PLUs ≈ 2231 ≈ Start PLU lawmaking (1 - 999999) Item: Type of unit toll entry Example For each PLU For a range of PLUs Folio 43 2210...

• Page 46: Sign (+/-) And Tax Status (#2211, 2232)

  FOR THE Director-one-A410/A420 02.4.twenty 6:48 PM Sign (+/-) and tax status Process For each PLU ≈ 2211 For a range of PLUs ≈ 2232 ≈ Start PLU code (1 - 999999) Item: Sign (+/-) VAT4 or TAX4 VAT3 or TAX3 VAT2 or TAX2 VAT1 or TAX1 •...

• Page 47: Alphanumeric Characters 2214

  FOR THE Managing director-i-A410/A420 02.four.twenty 6:48 PM Example For each PLU For a range of PLUs Alphanumeric characters You lot can plan a maximum of 16 characters (item label) for each PLU/subdepartment. Select the characters you lot want to programme, referring to department "2 How to program alphanumeric characters" in chapter "PRIOR TO PROGRAMMING".

• Page 48: Assigning Of Plus To Committee Groups (#2215, 2235)

  FOR THE Managing director-1-A410/A420 02.4.twenty vi:48 PM Assigning of PLUs to committee groups You can assign PLUs/subdepartments to committee groups. Procedure For each PLU ≈ 2215 For a range of PLUs ≈ 2235 ≈ Start PLU code (i - 999999) *A: Commission group 0 – ix (0=no commission) Example For each PLU Cardinal operation...

• Page 49: Stock Quantity (#1222, 1220, 1221)

  FOR THE MANAGER-one-A410/A420 02.4.20 6:48 PM Stock quantity PGM 1 You tin assign a stock quantity to each PLU code. When yous assign it for the first time, do the post-obit: Procedure ≈ 1222 Example If you assign another stock quantity to the PLU lawmaking which y'all have assigned a stock quantity to, Note it will exist overridden.

• Page 50: Set Plu (#2221)

  FOR THE Managing director-1-A410/A420 02.4.20 vi:48 PM Subtracting the stock quantity Instance Key operation Set PLU PGM 2 2221 Procedure ≈ 2221 PLU codes must have already been defined. Annotation You tin program a maximum of 15 prepare PLUs. A ready PLU tin can be tied to a maximum of five PLUs. Instance Fundamental operation Page 48...

• Folio 51: Link Plu (#2220)

  FOR THE Director-1-A410/A420 02.4.20 6:48 PM Link PLU 2220 PGM two Process ≈ 2220 PLU codes must take already been divers. Note You can program a maximum of 15 link PLUs. A link PLU can be linked to a maximum of 5 PLUs. Case Mix-and-match tabular array The mix-and-friction match table consists of the discount amount, and the trip level for discount (satisfying count of...
• Page 52 FOR THE MANAGER-1-A410/A420 02.4.twenty vi:48 PM Assigning items to the mix-and-friction match table Procedure ≈ 2251 Example Cardinal performance Programming of table text Procedure ≈ 2254 Example Key operation Page 50 To plan for another tabular array Cancellation To repeat up to 5 times ≈...

• Page 53: Programming Of Plu Levels And Straight Plu Keys (#2219)

  Process ≈ 2219 To keep the current level The key number placement is determined past your local Authorized SHARP Dealer. Note Instance Programming so that PLU code 1 (level 1) and 65 (level 2) are assigned to fundamental no. 21...

• Folio 54: Programming For Miscellaneous Keys

  FOR THE Director-1-A410/A420 02.iv.xx half dozen:48 PM Programming for miscellaneous keys Simply function keys which y'all have programmed on the keyboard will allow the programming. Programming the rate ( 1310 Directly PGM 2 You tin program percent rates, currency substitution rates, deduction amounts and commission rates. Procedure ≈...

• Page 55: Programming The Tab Of Foreign Currency ( ) (#2330)

  FOR THE Managing director-2-A410/A420 02.4.twenty vi:49 PM Programming the tab of foreign currency ( When you innovate EURO on your annals, this setting for the Note execution of Job #800 in the X2/Z2 manner. Procedure 2330 *: Function no. 62: For the 64: For the 63: For the 65: For the...

• Page 56: Assigning The Drawer Number To The Drawer For Foreign Currency (#2680)

  FOR THE Managing director-2-A410/A420 02.4.20 half dozen:49 PM Assigning the drawer number to the drawer for foreign currency You can assign a number of the drawer which opens when ane of the post-obit operations is performed. • I of through is pressed without any entry. •...

• Page 57: Sign ( % , - ) (#2311)

  FOR THE Managing director-2-A410/A420 02.four.20 6:49 PM Example +/- sign ( PGM 2 Programming of the +/- sign assigns the premium or discount office for each fundamental. Process 2311 *ane: Function no. i: For the 5: For the two: For the 6: For the iii: For the 7: For the...

• Page 58: Detail % Or Subtotal % Selection ( ) 2315

  FOR THE Managing director-2-A410/A420 02.iv.20 6:49 PM Particular % or subtotal % selection ( Item % Select this when a percent calculation is desired for the individual department and PLU. Subtotal % Select this when a percent calculation is desired for subtotals. Procedure 2315 Role no.

• Page 59: Item Or Subtotal Selection ( ) (#2316)

  FOR THE MANAGER-2-A410/A420 02.4.20 six:49 PM Case Item or subtotal Item Select this when a deduction calculation is desired for the individual department and PLU. Subtotal Select this when a deduction calculation is desired for subtotals. Procedure 2316 Part no. 1: For the 2: For the 3: For the...

• Page 60: Programming For The Through , And Through

  FOR THE Manager-ii-A410/A420 02.4.twenty 6:49 PM Programming for the Functional programming Yous tin set each media for: EFT transaction Skid printing If media entries must be printed on the slip printer, set the respective media for compulsory slip press. Footer printing This programming decides whether or not your machine should impress a message at the human foot of a receipt when a specified media key is used.
• Page 61 FOR THE MANAGER-2-A410/A420 02.4.20 vi:49 PM Item: EFT transaction Sideslip printing Footer press Non-add code compulsory Change enable (over-tender enable) Validation print compulsory Drawer open up Compulsory corporeality tendered Example Folio 59 Selection: select compulsory select not-compulsory select compulsory select non-compulsory select footer printing on selected media Yes select footer printing on selected media No select compulsory non-add code entry...

• Page 62: High Amount Lockout (Halo) For Cheque Cashing, Cheque Modify And Cash In Drawer 2321

  FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM High amount lockout (HALO) for cheque cashing, check modify and cash in drawer PGM 2 2321 Y'all can program the upper limit amounts for cheque cashing, cheque change and cash in drawer. Process 2321 *1: Function no.

• Folio 63: Programming Of Function Text

  FOR THE Managing director-2-A410/A420 02.4.20 half-dozen:49 PM Example Programming of function text Programming PGM 2 You lot tin can programme a maximum of 12 characters for each function key and other functions using the list on the following pages. Select the characters you want to program referring to department "2 How to program alphanumeric characters"...

• Page 64: Listing Of Function Texts

  FOR THE Manager-2-A410/A420 02.4.20 6:49 PM List of function texts Function Cardinal or function Net 1 Differ Taxable 1 subtotal Taxable ii subtotal Taxable 3 subtotal Taxable 4 subtotal VAT/taxation i VAT/tax 2 VAT/taxation 3 VAT/tax 4 Total tax Internet without tax VAT shift VAT/taxation delete Net ii...
• Page 65 FOR THE Managing director-two-A410/A420 02.4.xx 6:49 PM Office Key or function Committee sale iii Commission sale 4 Committee sale 5 Commission sale 6 Commission sale vii Commission sale eight Committee sale nine Non commission auction Committee corporeality i Commission amount 2 Commission corporeality 3 Commission amount 4 Commission amount v...

• Folio 66: Cashier And Clerk Programming

  FOR THE Director-two-A410/A420 02.4.20 6:49 PM Cashier and clerk programming Cashier lawmaking PGM i You tin can assign a cashier lawmaking to each cashier. Process 1500 * Programming cashier code "0" inhibits entries of the cashier code. Example Primal operation Cashier proper name PGM 1 You lot can programme a maximum of 12 characters (cashier name) for each cashier.

• Page 67: Functional Programming For Cashiers (#2510)

  FOR THE MANAGER-2-A410/A420 02.iv.twenty 6:49 PM Functional programming for cashiers Process 2510 A cashier code you take programmed for the cashier by chore #1500. Particular: Invitee check copy VAT shift Price level Drawer Example Programming of PBLU code Procedure 2511 Cashier code (1 - 9999) Example...

• Page 68: Clerk Code (#1400)

  FOR THE MANAGER-2-A410/A420 02.four.20 6:49 PM Clerk code PGM i PGM 2 You tin assign a clerk code to each clerk. Procedure 1400 * Programming clerk code "0" inhibits entries of the clerk code. Example Key operation Clerk name PGM ane PGM 2 You can program a maximum of 12 characters (clerk proper name) for each clerk.

• Page 69: Programming Diverse Functions

  FOR THE Director-two-A410/A420 02.4.20 6:49 PM Programming diverse functions Programming for optional characteristic selection Your register enables y'all to select the following options. OP 10/Z way availability When a cashier need to accept the cashier/clerk Ten/Z report, he or she will use the OP X/Z mode. This programming determines whether he or she will exist allowed to use this mode.
• Page 70 FOR THE Manager-2-A410/A420 02.4.twenty 6:49 PM Automatic render timing for PLU cost level • By ane receipt: Returns the price level to cost 1 by one receipt. • By one particular: Returns the cost level to price 1 by one item entry. VAT/tax amount, taxable amount and cyberspace corporeality printing on the sideslip Time printing on the slip No sale in REG style...
• Page 71 FOR THE MANAGER-2-A410/A420 02.4.xx 6:49 PM **P: 1 Item: OP Ten/Z mode Paid-out in REG fashion Always enter 0. Refund in the REG manner Directly void in the REG mode Indirect void in the REG mode Subtotal void in the REG manner Validation printing in a refund entry **P: 2 Detail:...
• Folio 72 FOR THE MANAGER-2-A410/A420 02.four.20 6:49 PM **P: four Particular: Always enter 0. Always enter 0. VAT/tax amount printing on the receipt/periodical Taxable amount press on the receipt/periodical Net amount printing on the receipt/journal Ever enter 0. Always enter 0. Automatic return timing for PLU level **P: 5 Item: Ever enter 0.
• Page 73 FOR THE Manager-two-A410/A420 02.4.20 vi:49 PM **P: 7 Item: Always enter 0. Always enter 0. No auction in REG mode Finalization when the subtotal amount is zippo in the REG mode Ever enter 0. Always enter 0. E'er enter 0. Always enter 0.

• Page 74: Programming Warning Length Of Fourth dimension With Drawer Opening 2617

  FOR THE Managing director-2-A410/A420 02.4.20 6:49 PM Programming alarm length of time with drawer opening If the drawer still remains open when a specified length of time has elapsed, your machine gives the alarm. Process To disable the alarm function 2617 Example Key functioning Your machine starts to monitor how long the drawer is kept open the moment the drawer is opened...

• Folio 75: Programming Of Logo Messages (#2614)

  Your register can impress programmed messages for customers on every receipt. On the standard model, only graphic logo (ER-A410)/only header 3-line message (ER-A420) is printed on the receipt. (If you want a graphic logo customerized for your store, delight consult your dealer.) If you want to print logo message, delight consult your dealer as well.

• Page 76: Programming Of Error Messages (#2641)

  FOR THE Manager-2-A410/A420 02.4.20 vi:49 PM Programming of fault letters Your register has standard error letters shown in the following table. For more information near the alphanumeric characters programming, run into section "2 How to program alphanumeric characters" nether the chapter "PRIOR TO PROGRAMMING". Process 2641 * Text no.: Encounter "Error bulletin tabular array"...

• Folio 77: Programming Of Texts Of Validation Printing (#2642)

  FOR THE Manager-ii-A410/A420 02.4.20 six:49 PM Programming of texts of validation printing You can program the texts (3 lines) to be printed on validation slip. Up to 24 characters tin be programmed per line. Procedure 2642 Case DEPOSIT Programming of texts of skid printing Y'all can program the texts (3 lines) to exist printed on skid.

• Page 78: Programming Of Payee Name (For English Cheque) (#2646)

  FOR THE MANAGER-2-A410/A420 02.iv.20 half-dozen:49 PM Programming of payee name (for English cheque) Y'all can plan payee name (2 lines) for English cheque to be printed on the cheque. Up to 21 characters can exist programmed per line. Process 2646 Example Central operation Page 76...

• Page 79: Option Of X1/Z1 And X2/Z2 Reports To Be Printed In The Stacked Written report Sequence 2620

  FOR THE MANAGER-ii-A410/A420 02.4.xx 6:49 PM Pick of X1/Z1 and X2/Z2 reports to be printed in the stacked study sequence PGM ii Your annals is equipped with the stacked report printing function that enables multiple X/Z reports to be printed in sequence with only a single request.

• Page 80: Setting The Fourth dimension Range For Hourly Reports 2619

  FOR THE Director-ii-A410/A420 02.4.20 half-dozen:49 PM Setting the fourth dimension range for hourly reports You tin can set the fourth dimension range for an hourly report . Procedure When A through C are all zeros 2619 *A: Time range To gear up the fourth dimension range to xxx minutes (in the 24-hr arrangement), enter 0. To gear up the fourth dimension range to hr (in the 24-hour system), enter 1.

• Folio 81: Functional Programming For The Printer (#2990)

  FOR THE Director-two-A410/A420 02.four.20 vi:49 PM Functional programming for the printer Process 2990 *AB: Printing density (00 – 99) 00 = eighty% for standard density l = 90% for standard density 99 = 100% for standard density Example Programming for EURO change chore Functional programming Procedure 2681...
• Page 82 FOR THE MANAGER-2-A410/A420 02.four.xx vi:49 PM Appointment/time of EURO change Process To program nothing 2682 Example Central operation Procedure To program zip 2683 Example Central performance Page 80 Date (vii or 8 digits) 2682 26112003 Time (Hr: 0 - 23) 2683 Print Print...

• Page 83: Rs-232C Channel Assignment (#2690)

  FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM RS-232C channel assignment Your annals is equipped with two RS-232C interfaces. If you apply the on-line communication function, the channel number of each RS-232C interface must be programmed by using the post-obit procedure. To activate the on-line communication, consult your dealer. Procedure 2690 ** P: 1...

• Page 84: Programming Of Rs-232C Interface (#6110, 6111, 6112, 6113, 6115, 6220)

  FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM Programming of RS-232C interface 6220 Terminal number Process 6110 Transmission line form Procedure To program cypher 6111 Particular: Sensing of the CI signal Line form Functional programming Procedure To programme zero 6112 Item: Selection of print data sending/data sending and receiving Baud rate (38400/19200/9600/4800 bps) The selected baud rate is used for on-line communications and print data sending.
• Folio 85 FOR THE MANAGER-ii-A410/A420 02.4.20 6:49 PM Programming for print data sending Procedure 6220 Item: Sensing of DR bespeak Sensing of CS signal Sending of all print data Clandestine codes to control admission to PGM1 mode, X1/Z1 style and X2/Z2 mode PGM 2 2630 You must enter a secret code according to the following procedure before performing whatsoever PGM1-fashion, X1/Z1-...

• Folio 86: Setting The Machine Key - Automated Sequencing Fundamental - 2900

  FOR THE Director-2-A410/A420 02.4.20 6:49 PM Setting the AUTO key — Automated sequencing cardinal — If yous program frequently performed transactions or study sequences for the AUTO keys, you tin can call those transactions and/or reports simply by pressing the respective Machine keys in fundamental operations. This programming tin can be done when your machine is in the X2/Z2 style.

• Page 87: Training Mode

  FOR THE MANAGER-2-A410/A420 02.4.twenty 6:49 PM TRAINING mode The grooming mode is used when the operator or the manager practices register operations. When a cashier prepare in training is selected, the car automatically enters the training way. When a cashier not set in training is selected, the machine automatically enters the ordinary REG style.

• Page 88: Reading Stored Programs

  FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM Reading stored programs Your automobile allows you to read every programme stored in the PGM1 and PGM2 modes. Program details and procedures for their reading Style switch Program for: position PGM2 or Departments PGM1 PGM2 or PLUs/ PGM1...
• Page 89 FOR THE Manager-2-A410/A420 02.iv.twenty 6:49 PM Way switch Program for: position Function PGM2 preset 2 Letters PGM2 Tax rates PGM2 Auto keys PGM2 Thermal printer PGM2 On-line preset PGM2 Page 87 Procedure code no. 2600 2600 2640 2640 2700 2700 2900 2900 2990...

• Folio 90: Sample Printouts

  FOR THE Managing director-2-A410/A420 02.4.20 half-dozen:49 PM Sample printouts 1 Reading of programmed items for departments (Reading in the PGM1 and PGM2 modes) Job code no. Range Dept. code Item label * When you lot take this report in the PGM1 mode, the PGM2 indication is replaced by a "PGM1".
• Page 91 FOR THE MANAGER-ii-A410/A420 02.iv.20 6:49 PM 3 Reading of programmed key nos. for departments and PLUs (Reading in the PGM2 mode) Page 89 4 Reading of programmed items for link PLUs (Reading in the PGM2 mode) Key no. Leading Dept. code PLU code 5 Reading of programmed prepare PLUs (Reading in the PGM2 way)
• Page 92 FOR THE MANAGER-two-A410/A420 02.iv.twenty 6:49 PM 6 Reading of mix-and-friction match table (Reading in the PGM2 style) Folio 90 seven Reading of programmed items for cashiers (Reading in the PGM1 and PGM2 modes) Report blazon Cashier name Mix-and-match table no. Cashier no. Discount corporeality Trip level Text...
• Page 93 FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM Folio 91 9 Reading of programmed items for functions - ane (Reading in the PGM1 and PGM2 modes) To exist connected on the next folio * When you take this study in the PGM1 way, the PGM2 indication is replaced by a "PGM1".
• Page 94 FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM Page 92 10 Reading of programmed items for functions - 2 (Reading in the PGM2 style) Logo message Line feed for differ ST Optional feature selection Drawer open alarm time Hourly report format/get-go hour Stacked report Secret code Drawer no.
• Folio 95 FOR THE Managing director-2-A410/A420 02.iv.20 six:49 PM Page 93 11 Reading of programmed messages (Reading in the PGM2 manner) Fault messages To be continued...
• Folio 96 FOR THE Managing director-ii-A410/A420 02.4.xx six:49 PM 12 Reading of programmed revenue enhancement rates (Reading in the PGM2 mode) 13 Reading of programmed items for auto keys (Reading in the PGM2 way) Folio 94 xiv Reading of programmed items for the thermal printer (Reading in the PGM2 manner) Tax charge per unit Everyman taxable...

• Page 97: Reading (X) And Resetting (Z) Of Sales Totals

  FOR THE Manager-2-A410/A420 02.four.20 half-dozen:49 PM READING (X) AND RESETTING (Z) OF SALES TOTALS • Use the reading function (X) when yous need to have a reading of sales information entered since the concluding resetting. You tin have this reading whatever number of times. Information technology does not bear on the register's memory. •...
• Page 98 FOR THE MANAGER-two-A410/A420 02.4.20 vi:49 PM Mode switch position Item X1/Z1 X2/Z2 Full grouping full report on section X1, Z1 X1, Z1 PLU/subdepartment report past designated range X2, Z2 PLU/subdepartment X1, Z1 X1, Z1 written report by associated X2, Z2 department PLU/subdepartment nada sales study PLU/subdepartment...
• Page 99 FOR THE Manager-2-A410/A420 02.iv.20 half dozen:49 PM Style switch position Detail X1/Z1 Commission sales report Transaction report Total in drawer study Hourly report X1, Z1 X1, Z1 Stacked report Daily net report Individual and full clerk reading and resetting are available only in the cashier and clerk system. In Note the factory setting, the register provides the "cashier merely"...

• Folio 100: Daily Sales Totals

  FOR THE Managing director-2-A410/A420 02.iv.20 vi:49 PM Daily sales totals General report You lot can take X and Z reports in the X1/Z1 mode. The apply of the decimal key ( will actually reset the sales totals. • Sample Ten report To be connected on the next folio Note Not all reports provide the resetting adequacy.
• Folio 101 FOR THE MANAGER-2-A410/A420 02.4.20 vi:49 PM Page 99 "-" dept. counter and total "+" hash dept. counter and total "-" hash dept. counter and full "+" bottle render dept. counter and total "-" bottle render dept. counter and total Subtotal 3 counter and total Set PLU discount full Subtotal percent 1 counter and full...
• Page 102 FOR THE MANAGER-2-A410/A420 02.4.xx 6:49 PM To be continued on the adjacent page Folio 100 Item percent iii counter and total Mix-and-match disbelieve counter and total Coupon PLU disbelieve counter and total Refund counter and full REG-mode void counter and full Void-fashion transaction counter and full Manager item void counter and full Subtotal void counter and total...
• Page 103 FOR THE Manager-2-A410/A420 02.4.xx half dozen:49 PM Page 101 Credit i auction and tendering counter and total Exchange 1 counter and total Exchange 1 in domestic currency Exchange one check 1-4 counter and full Exchange ane cheque 1-4 total in domestic currency Exchange 1 credit ane-4 counter and total Exchange one credit one-iv total in domestic currency Cash in drawer...

• Page 104: Cashier Written report

  FOR THE Manager-ii-A410/A420 02.4.20 6:49 PM Cashier report Using this part, you can take Ten and Z reports for private cashiers or all cashiers. Individual cashier reading and resetting The OP X/Z-mode reading and resetting is allowed just when your machine has been programmed Annotation for "OP X/Z mode available"...
• Page 105 FOR THE MANAGER-2-A410/A420 02.4.20 six:49 PM Page 103 Full cashier reading and resetting The subsequent printout occurs in the aforementioned format as in the sample reports of individual cashier reading and resetting, and sales data for cashiers impress in this sequence.

• Folio 106: Clerk Study

  FOR THE Manager-two-A410/A420 02.4.xx 6:49 PM Clerk report Using this function, you tin can take X and Z reports for individual clerks or all clerks. Individual clerk reading and resetting The OP X/Z-way reading and resetting is immune only when your machine has been programmed Note for "OP X/Z mode available"...

• Page 107: Hourly Report

  FOR THE Manager-2-A410/A420 02.4.20 6:49 PM Hourly report You tin can accept X and Z reports for sales totals and transaction (customer) counters for 48 half hours, or 24 hours. If both quantity and amount are zero, their print is skipped. •...

• Folio 108: Full Department Report

  FOR THE MANAGER-2-A410/A420 02.4.xx 6:49 PM Page 106 Full section report Sales q'ty and total Ratio of dept. 2 sales amount to group ane total...

• Page 109: Individual Group Total Written report On Department

  FOR THE Manager-2-A410/A420 02.4.xx 6:49 PM Individual grouping total report on section Folio 107 Full group full report on department Group 2 sales q'ty and total Grouping ane sales q'ty and full...

• Page 110: Plu/Subdepartment Report By Designated Range

  FOR THE MANAGER-ii-A410/A420 02.4.xx six:49 PM PLU/subdepartment report by designated range This function provides yous with Ten and Z reports for sales data of a certain range of PLUs/subdepartments. Y'all must enter the start and terminate PLU/subdepartment code of the range. Of grade, the range may correspond all of the PLUs/subdepartments in your register.

• Page 111: Plu/Subdepartment Report By Associated Department

  FOR THE Managing director-2-A410/A420 02.4.20 6:49 PM PLU/subdepartment report past associated section • Sample 10 study PLU code PLU/subdepartment cipher sales report Folio 109 • Sample Z report Associated dept.code Sales q'ty and total The subsequent printout occurs in the same format as in the sample Ten report.

• Page 112: Plu/Subdepartment Stock Written report

  FOR THE MANAGER-2-A410/A420 02.4.20 6:49 PM PLU/subdepartment stock report PBLU report • Sample X report Page 110 Range Current stock • Sample Z written report The subsequent printout occurs in the same format as in the sample X report.

• Page 113: Pblu Report Past Cashier

  FOR THE Director-2-A410/A420 02.4.20 6:49 PM PBLU report by cashier • Sample X report Balance report Page 111 • Sample Z written report The subsequent printout occurs in the same format as in the sample X report. Thou total rest of the previous mean solar day Social club total Paid full Onetime balance +...

• Page 114: Committee Sales Written report

  FOR THE MANAGER-two-A410/A420 02.four.20 six:49 PM Commission sales study Transaction report In this written report the same transaction data as those printed when full reading is taken are printed except section sales totals. X1/Z1 stacked report You tin print multiple X1/Z1 reports in sequence at a time. In this case, you need to programme in advance what X1/Z1 reports should be printed in the stacked report sequence.

• Page 115: Periodic Consolidation

  FOR THE MANAGER-2-A410/A420 02.iv.20 half dozen:49 PM Periodic consolidation Your annals allows yous to accept consolidation Ten and Z reports of a chosen menses (normally one week or a month). Generality The periodic reading or resetting reports are the same in format as those in the X1/Z1 report for daily total except job code no.

• Page 116: Daily Cyberspace Report

  FOR THE MANAGER-two-A410/A420 02.iv.20 6:49 PM Daily net report • Sample X written report X2/Z2 stacked written report Y'all can print multiple X2/Z2 reports in sequence at a time. In this case, you need to plan in advance what X2/Z2 reports should exist printed in the stacked report sequence. The following job code numbers lone tin be used for stacked report printing.

• Page 117: Compulsory Greenbacks/Cheque Declaration

  FOR THE MANAGER-two-A410/A420 02.iv.20 6:49 PM COMPULSORY Cash/CHEQUE Announcement If you want to make mandatory the declaration of the greenbacks and cheque amount in the drawer before outputting cashier Z reports, consult your dealer and have your annals programmed for compulsory greenbacks/cheque annunciation.
• Folio 118 FOR THE Director-2-A410/A420 02.iv.20 6:49 PM Page 116 CCD entry amount Currency exchange i cash in drawer to be obtained Total of entered (alleged) substitution ane in drawer Divergence Greenbacks in drawer to be obtained Cheque (in domestic currency) in drawer to be obtained Greenbacks/bank check in drawer to be obtained Total of entered (declared) greenbacks/cheque in drawer Departure...

• Page 119: Programming For Euro

  FOR THE MANAGER-2-A410/A420 02.four.20 vi:49 PM PROGRAMMING FOR EURO Your register can be modified to correspond with each period set for the introduction of EURO, and in your register each currency is treated as shown on the table below depending on which menses you are in. Basically your register can be automatically modified to correspond to the introduction of EURO by executing the functioning of Task #800 in X2/Z2 mode.

• Page 120: Automated Modification Of Register System For Introduction Of Euro

  FOR THE MANAGER-2-A410/A420 02.4.xx six:49 PM Automated modification of register organisation for introduction of EURO X2/Z2 To make your annals correspond to the introduction of EURO, your annals organisation tin can be automatically modified when the procedure shown beneath is executed in the X2/Z2 mode. According to the steps of the introduction, you tin make your register stand for to EURO.

• Page 121: Optional Programming For The Introduction Of Euro

  FOR THE MANAGER-2-A410/A420 02.4.twenty vi:49 PM After the execution of the procedure with the exchange of "2", treat EURO equally domestic currency, and national currency equally foreign currency using Exchange 1 ( With the execution of the procedure with the exchange of "2", your domestic currency becomes EURO. While unit prices of departments and PLUs are automatically converted to EURO currency, y'all must modify the rates or amounts for the miscellaneous keys so that they are based on amounts in EURO.

• Page 122: Override Entries

  FOR THE Director-2-A410/A420 02.4.20 6:49 PM OVERRIDE ENTRIES Programmed limit for functions (such every bit for maximum amounts) can be overridden by making an entry in the MGR mode. Procedure Plow the mode switch to the MGR position. Brand an override entry. Example In this example, the register has been programmed not to allow deduction entries over 2.00.

• Folio 123: Correction After Finalizing Atransaction (After Generating A Receipt)

  FOR THE OPERATOR-A410/A420 02.4.20 6:l PM CORRECTION AFTER FINALIZING A TRANSACTION (Subsequently GENERATING A RECEIPT) When y'all need to void incorrect entries that cashiers cannot correct (wrong entries that are plant after finalizing a transaction or cannot be corrected by straight or indirect void), follow this procedure in the MGR mode. Plow the mode switch to the MGR position.

• Page 124: For The Operator

  FOR THE OPERATOR-A410/A420 02.iv.20 6:50 PM FOR THE OPERATOR PRIOR TO ENTRIES Preparations for entries Before registrations, insert the operator central into the fashion switch and turn it to the REG position and cheque the following items: Receipt and journal paper rolls If the receipt and journal paper rolls are non prepare in the motorcar or in that location are low rolls, install new ones according to section "4.

• Page 125: Power Saving Mode

  FOR THE OPERATOR-A410/A420 02.4.xx 6:50 PM Procedure Cashier assignment I Sign-on To display the signed-on cashier code Variant i : (Lawmaking is displayed) Variant ii : (Code is non displayed) Clerk assignment I Sign-on To brandish the signed-on clerk code Variant 1 : (Lawmaking is displayed) Variant ii :...

• Page 126: Entries

  FOR THE OPERATOR-A410/A420 02.4.xx vi:50 PM ENTRIES Item entries Single item entries Procedure Department entries (direct section entries) Enter a unit toll and press a department key. If you lot use a programmed unit cost, printing a department fundamental simply. When using a programmed unit price Unit price * Department key (max.

• Page 127: Repeat Entries

  FOR THE OPERATOR-A410/A420 02.4.20 6:l PM Example Repeat entries You lot can employ this function for entering a sale of 2 or more same items. Example Repeated department entry (direct) Repeated department entry (indirect) Repeated PLU entry (indirect) Repeated PLU entry (directly) Repeated subdepartment...

• Page 128: Multiplication Entries

  FOR THE OPERATOR-A410/A420 02.4.20 6:50 PM Multiplication entries Use this feature when you need to enter two or more same items. This feature helps when you sell a big quantity of items or demand to enter quantities that comprise decimals. Procedure When you use a programmed unit of measurement price...

• Page 129: Successive Multiplication Entries

  FOR THE OPERATOR-A410/A420 02.4.20 6:50 PM Successive multiplication entries This office is applied for case when you lot enter a auction of items sold by surface area (square meter). Procedure Length Width Unit toll PLU lawmaking Unit toll per m Unit price per m •...

• Folio 130: Divide-Pricing Entries

  FOR THE OPERATOR-A410/A420 02.four.20 6:50 PM Split-pricing entries You volition use this part when your client wants to purchase items usually sold in bulk. Procedure Selling q'ty Base q'ty But when y'all use a base q'ty programmed for PLU lawmaking •...

• Page 131: Single Item Cash Sale (Sics)/Single Item Finalize (Sif) Entries

  FOR THE OPERATOR-A410/A420 02.four.twenty 6:51 PM Single particular cash sale (SICS)/single item finalize (SIF) entries SICS entries • This function is useful when a auction is for only one particular and is for greenbacks; such as a pack of cigarettes. This function is applicable simply to those departments that have been prepare for SICS or to their associated PLUs or subdepartments.

• Page 132: Special Entries For Plus

  FOR THE OPERATOR-A410/A420 02.4.twenty 6:51 PM Special entries for PLUs PLU level shift (for straight PLU) This shift tin double or triple the number of PLUs on your register without adding boosted straight PLU keys. You tin can use direct PLUs in three levels by utilizing shift keys functions.
• Page 133 FOR THE OPERATOR-A410/A420 02.4.twenty six:51 PM Example • When your machine has been programmed for the automated return mode: Key functioning • When your machine has been programmed for the lock shift manner: Key operation Page 131 Print ¬ 1 Print ¬...

• Folio 134: Price Level Shift

  FOR THE OPERATOR-A410/A420 02.iv.twenty half-dozen:51 PM Price level shift Two dissimilar toll levels tin be programmed for each PLU. The price levels can exist changed for PLU registrations. You lot tin can shift the PLU price level (level 1 or 2) by utilizing the cost level shift key ( You must program a price level shift way (i.due east.

• Page 135: Set Plu Entries

  FOR THE OPERATOR-A410/A420 02.four.twenty half-dozen:51 PM Instance PLU price level 1: PLU lawmaking one (@i.91), PLU code 2 (@0.79) PLU toll level 2: PLU code 1 (@2.00), PLU code ii (@0.99) • When your annals has been programmed for the automatic render mode (by ane particular): Primal functioning •...

• Page 136: Link Plu Entries

  FOR THE OPERATOR-A410/A420 02.4.20 6:51 PM Link PLU entries Functioning is the aforementioned as normal PLU's. The action which is caused past the link PLU entry varies according to the PGM2 programming (#2616). Press detailed information When a link PLU is entered, the linked PLUs' total amount and text and their individual amounts are printed automatically.

• Page 137: Mix-And-Lucifer Part

  FOR THE OPERATOR-A410/A420 02.4.xx vi:51 PM Mix-and-lucifer part This function is user-friendly when selling same or unlike PLU items in a transaction and keeping a discount for them. Operation is the same as for normal PLUs. The mix-and-match table consists of the discount corporeality, the trip level for discount (satisfying count of entered item), and the text for a tabular array.

• Folio 138: Displaying And Printing Subtotals

  FOR THE OPERATOR-A410/A420 02.four.xx 6:51 PM Displaying and printing subtotals Your machine provides the following two types of subtotals: Normal subtotal This is a subtotal which is displayed and printed by pressing the entries which have been made is displayed. Case Key operation Difference subtotal (Differ ST)

• Page 139: Finalization Of Transaction

  FOR THE OPERATOR-A410/A420 02.4.xx 6:51 PM Finalization of transaction Cash or cheque tendering Press the cardinal to go a subtotal, enter the amount tendered by your customer, then printing the it is a cash tender or printing one of the greater than the amount of the sale, your register will show the change due amount and the text "Modify".

• Folio 140: Greenbacks Or Cheque Sale That Does Non Need Whatever Tender Entry

  FOR THE OPERATOR-A410/A420 02.4.twenty half dozen:51 PM Greenbacks or cheque auction that does not need any tender entry Enter items and printing the cheque sale. Your annals will brandish the total auction amount. Example Key operation Credit sale Enter items and press the respective credit keys. Key operation Example Corporeality tendering operations (i.e., change calculations) can be accomplished by the...

• Page 141: Computation Of Vat (Value Added Tax)/Tax

  FOR THE OPERATOR-A410/A420 02.four.20 6:51 PM Computation of VAT (Value Added Tax)/revenue enhancement VAT/ taxation system The car may be programmed for the post-obit vi tax systems by your dealer. Automated VAT 1 - iv system (Automatic functioning method using programmed percentages) This system, at settlement, calculates VAT for taxable one, taxable 2, taxable 3, and taxable four subtotals by using the corresponding programmed percentages.

• Page 142: Vat Shift Entries

  VAT2/tax2 VAT3/tax3 VAT4/tax4 When the multiple VAT/revenue enhancement is assigned to a department or a PLU, a smaller number of the VAT/tax will be printed. For details, contact your authorized Sharp dealer. Example Cardinal operation (When the manual VAT 1- 4 system...

• Folio 143: Guest Bank check (Pblu)

  FOR THE OPERATOR-A410/A420 02.4.20 6:51 PM Guest check (PBLU) PBLU system: The previous rest is automatically loaded past entering a invitee check code (= a PBLU code) when boosted ordering occurs. The details of the guild are not stored in the previous balance lookup file (PB lookup file). If yous desire to use this office, consult your dealer.
• Page 144 FOR THE OPERATOR-A410/A420 02.4.xx 6:51 PM Additional ordering Use the post-obit procedure. Procedure PBLU code (one - 9999) Tendering amount (max. 8 digits) When paid in full. (settlement) *1 This is the optional office (Temporary finalization). Yous can temporarily finalize a guest check by pressing the current rest, including tax.

• Page 145: Deposit Entries

  FOR THE OPERATOR-A410/A420 02.4.20 six:51 PM Deposit entries Deposit refers to a prepayment on a guest check. It can be received in cash, by bank check or credit. You can brand a deposit entry only when entering a PBLU code. Information technology cannot exist done during handling of a tendered amount.

• Folio 146: Beak Press

  FOR THE OPERATOR-A410/A420 02.four.20 6:51 PM Bill printing This function is used for issuing the bill to the guest. Your register can print the bill on the receipt or the sideslip. For selecting the skid printer, consult your dealer. Procedure Finalization of payment This office is available immediately after the finalization of transaction (including subsequently pressing Notation...

• Page 147: Auxiliary Entries

  FOR THE OPERATOR-A410/A420 02.iv.20 6:51 PM Auxiliary entries Percent calculations (premium or disbelieve) • Your annals provides the percent calculation for the subtotal or each item entry depending on the programming. • Percentage: 0.01 to 99.99% Percent calculation for the subtotal Instance (When a discount of 10% is...

• Page 148: Refund Entries

  FOR THE OPERATOR-A410/A420 02.4.20 six:51 PM Deduction for item entries Case Key operation Refund entries For a refund entry, press the key merely before you printing a department key, The operation before pressing the item is the one entered into a department, enter the corporeality of the refund, then press the corresponding department key in this order;...

• Page 149: Payment Treatment

  FOR THE OPERATOR-A410/A420 02.4.xx vi:51 PM Payment treatment Currency exchange Your annals allows payment entries of foreign currency. Pressing one of the subtotal in foreign currency. Procedure After an entry Preset exchange charge per unit is completed Later the amount tendered is found smaller than the sales amount in a sales entry...

• Folio 150: Received On Account Entries

  FOR THE OPERATOR-A410/A420 02.iv.20 half-dozen:51 PM Received on account entries Procedure Corporeality (max. viii digits) Example Cardinal operation Paid out entries Procedure Corporeality (max. eight digits) Example Key operation Page 148 through through Print 12345 4800 through through Print 6789 3000...

• Folio 151: No Auction (Exchange)

  FOR THE OPERATOR-A410/A420 02.iv.20 vi:51 PM No sale (commutation) Simply printing the key without any entry. The drawer will open and the printer will print "NO Auction" on both the periodical and the receipt. If you let your auto print a not-add code number before pressing the no sale entry is achieved with a non-add code number printed.

• Page 152: Correction

  FOR THE OPERATOR-A410/A420 02.four.twenty 6:51 PM CORRECTION Correction of the last entry (direct void) If yous make an incorrect entry relating to a department, PLU/subdepartment, pct ( deduction ( through ) or refund, yous can void this entry past pressing the wrong entry.

• Page 153: Subtotal Void

  FOR THE OPERATOR-A410/A420 02.iv.twenty half dozen:51 PM Subtotal void You tin can void an unabridged transaction. Once subtotal void is executed, the transaction is aborted and the register issues a receipt. Instance Correction of incorrect entries not handled by the direct or indirect void function Any errors found after the entry of a transaction has been completed or during an corporeality tendered entry cannot be voided.

• Page 154: Special Printing Functions

  FOR THE OPERATOR-A410/A420 02.iv.twenty vi:51 PM SPECIAL Press FUNCTIONS Copy receipt printing If your customer wants a receipt later you lot have finalized a transaction with the receipt function existence in the "OFF" status (no receipting), press the receipt when the receipt part is in the "ON" status. If you want to make a copy, please consult your dealer. Note Pressing the fundamental in the OP X/Z style before registration toggles the condition "ON"...

• Page 155: Guest Check Re-create

  FOR THE OPERATOR-A410/A420 02.iv.20 vi:51 PM Guest check re-create You can employ this role when you want to take a copy of invitee check. Press the key and brand a desired entry. Procedure Item entries The guest check copy has nothing to do with the retention. Note Example Printing of header and footer graphic logos...

• Page 156: Validation Printing Function

  Press of the employee's arrival and departure times Your annals tin perform employee'south arrival and departure time printing when it is connected with the slip printer. For the details of skid printer, contact your authorized Precipitous dealer. For printing, you must exist in the OP X/Z mode.

• Folio 157: Overlapped Cashier Entry

  MAINTENANCE-A410/A420 02.four.20 six:51 PM OVERLAPPED CASHIER ENTRY This office allows you to switch from ane cashier to another and to interrupt the first cashier'due south entry. And so the second cashier can do his or her entry in this mode. For actual use of this function, consult your dealer. Example Cashier i: Entry started Cashier ii: Cashier modify (1 to two), interrupt initiated...

• Folio 158: Operator Maintenance

  MAINTENANCE-A410/A420 02.4.20 6:51 PM OPERATOR MAINTENANCE In case of ability failure When ability is lost, the machine retains its memory contents and all information on sales entries. • When power failure is encountered in register idle state or during an entry, the motorcar returns to the normal land of performance afterwards power recovery.

• Folio 159: Cautions In Handling The Recording Paper (Thermal Paper)

  • Never touch on effectually the print head and the motor during printing or earlier they take had sufficient time to absurd. Cautions in handling the recording newspaper (thermal newspaper) • Utilise just the paper specified by Sharp. • Practise non unpack the thermal newspaper until you are fix to utilize it.

• Folio 160: Installing And Removing The Paper Scroll

  02.4.xx 6:51 PM Installing and removing the paper whorl Recording paper specifications Exist sure to use paper rolls specified by SHARP. The use of any other paper rolls than specified could cause paper jamming, resulting in register malfunction. Newspaper specification Newspaper width: 44.5 ±...
• Page 161 MAINTENANCE-A410/A420 02.4.20 6:51 PM Installing the periodical newspaper roll Notation • When it is difficult to insert paper into the paper chute, endeavor inserting it again by post-obit the steps described below. Head-up position In case of inserting the journal paper roll •...

• Page 162: Removing The Paper Curl

  MAINTENANCE-A410/A420 02.4.20 6:51 PM Removing the newspaper roll When a red dye appears on the newspaper roll, it is time to replace the existing paper coil. Supercede the paper roll with a new one. If you lot programme not to utilize your register for an extended menses of time, remove the paper gyre, and store information technology in the appropriate place.

• Page 163: Removing A Paper Jam

  MAINTENANCE-A410/A420 02.4.20 6:51 PM Removing a newspaper jam Precaution: Be very careful with the manual cutter, so as not to cutting yourself. Never bear upon the print caput immediately later printing, because the head may even so be hot. Page 161 Remove the outer side of the accept-upwardly spool as shown on the left.

• Page 164: Cleaning The Print Caput

  MAINTENANCE-A410/A420 02.4.20 6:51 PM Cleaning the impress caput When the printed text is getting nighttime or faint, paper dust may exist stuck to the print caput. Clean the impress head as follows: Pull all the manner forrad Print caput Page 162 Turn the way switch to the "...

• Page 165: Removing The Till And The Drawer

  MAINTENANCE-A410/A420 02.iv.20 6:51 PM Removing the till and the drawer The till in the register is detachable. After closing your business organization for the day, remove the till from the drawer and keep the drawer open up. The coin case is also detachable from the till. To detach the drawer, pull it forrad fully with the till removed, and remove it by lifting information technology upward.

• Page 166: Installing The Fixing Angle Subclass

  MAINTENANCE-A410/A420 02.4.xx half-dozen:51 PM Installing the fixing angle bracket To foreclose the register from moving when the drawer opens, the fixing bending bracket is supplied with the register. By attaching the bracket to the table where the register is installed, you lot tin hock the register on this bracket and secure the register to its position.

• Page 167: Earlier Calling For Service

  MAINTENANCE-A410/A420 02.4.twenty 6:51 PM Earlier calling for service The malfunctions shown in the left-manus column beneath, labelled "Mistake," practise not necessarily signal functional faults of the motorcar. It is therefore appropriate to refer to the "Checking" shown in the correct-hand column before calling for service.

• Page 168: List Of Options

  MAINTENANCE-A410/A420 02.4.20 6:51 PM LIST OF OPTIONS For your register, the post-obit options are bachelor. For details, contact your dealer. •Remote drawer model ER-03/04/05/06DW •Key kit models By using the post-obit key kits, you lot can change the keyboard layout of your register including the expansion of the number of departments.

• Page 169: Specifications

  02.4.20 6:51 PM SPECIFICATIONS Model: ER-A410/A420 Dimensions: 355 (W) 10 424 (D) x 305 (H) mm Weight: ER-A410: 12.2 kg / ER-A420: 12.1 kg Power source: Official (nominal) voltage and frequency Power consumption: Stand-past eleven W Operating 49 West (max.) Working temperature: 0 °C to forty °C...
• Page 170 ER-A410/A420(Hyo2,3) 02.4.20 half-dozen:46 PM The wires in this mains lead are coloured in accordance with the post-obit code: As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed every bit follows. The wire which is coloured Blueish must exist connected to the final which is marked with the letter North or coloured black.
• Folio 171 Sharp CORPORATION Printed in Korea / Imprimé en Corée / Gedruckt in Korea / Impreso en Corea ➀ 2477 BHZZ) T(TINSE HYO-1,iv(SEEG)(East) 02.iv.20, 6:46 PM...

This manual is also suitable for:

Er-a410

How To Label Cash Register Sharp Er-a420,

Source: https://www.manualslib.com/manual/203166/Sharp-Er-A420.html

Posted by: chronisternion1960.blogspot.com

Share this post